Adjusting The Chronograph Hand Position - BREIL CHRONO VD57 Manual De Instrucciones

E
ADJUSTING THE CHRONOGRAPH
HAND POSITION
Before setting the time, be sure to check if the chronograph hands are in the "0"
position when the chronograph is reset.
Note: The "0" position of the chronograph 1/10 second hand differs depending on the
models.
•
Some models have the "0" position of the chronograph 1/10 second hand at
3 and 9 o'clock sides of the small dial. In that case, check if the hand is level
with its both ends pointing to those "0" positions.
•
If the chronograph is in us, press the buttons in the following order to reset it, and
then check if the hands return to the "0" position. (For details, refer to
"CHRONOGRAPH".)
•
If the chronograph is counting : A
•
If the chronograph is stopped
•
If the split line is displayed
•
If any of the chronograph hands do not return to the "0" position when the
chronograph is reset, follow the procedure below to reset the hands.
8
B
: B
: B A B