Important Safety Instructions - Genius Audio GFC-100A-16 Manual Del Usuario

02
FEATURES
Uses AC power to power equipment that requires 10~16V DC power.
Converts standard AC(110~130V AC) household power to an adjustable 10~16V
DC power, and supplies up to 100 amps of continuous power.
Note: A normal vehicle's electrical system provides around 13.8 Volts when the
engine is running.
Is a versatile piece of equipment that can be used in several applications such
as retail audio displays, show cars, and test benches.
Features include:
•Adjustable regulated output voltage 10~16V
•Up to 100 amp output current
•Cooling fans
•Thermal overload shut off protection
•Current overload shut off protection
•Combo output connectors act as both binding posts and banana plug terminals
•Pulse charging to inhibit battery sulfation

IMPORTANT SAFETY INSTRUCTIONS

This manual contains important safety and operating instructions.
To reduce the risk of fire, electric shock, and injury to person or equipment;
carefully read the following before you use the power supply. Please read all
cautionary markings on the product that you will connect to the power supply.
WARNINGS:
•This product is not recommended for outdoor use.
•Do not expose the power supply to excessive moisture.
•This product is not intended to be used as a stand alone battery charger. lt is
designed for the purpose of providing supplemental power when a DC power
generator isn't available.
•Do not connect the a battery that is deeply discharged. The initial high level of
current draw will force the power supply into current limit mode for prolonged
periods. This type of use is harmful to the power supply.
•When used as a supplemental power supply will not damage connected batter-
ies. When a connected battery reaches a fully charged state will decrease its
output current to a safe level by degree.
•Should not be left connected to batteries for extended unattended periods of
time. This could result in damage to the connected batteries.
•Make sure the power supply is securely mounted to avoid injury or damage to
the unit.
•The power supply should be operated only from a standard AC outlet that
provides (110V AC/60Hz), as indicated on the label.