Getting Started; Installing Lters; Using The Appliance; Understanding The Air Quality Light - Philips AC2887 Manual Del Usuario

3 Getting started

Installing lters

Note
• Make sure the air puri er is unplugged
from the electrical outlet before
installing the lters.
• Make sure the side of the lter with the
tag is pointing towards you.
1
Remove all packaging materials of
the air puri cation lters (
2
Pull the bottom part of the front
panel to remove it from the
appliance ( g.d).
3
Press the two clips down and pull
the pre- lter towards you ( g.e).
4
Put the unpacked air puri cation
lters back into the appliance
( g.f).
5
Attach the pre- lter back into the
appliance ( g.g).
Note
• Make sure that the side with the two
clips is pointing towards you, and that
all hooks of the pre- lter are properly
attached to the puri er.
6
Reattach the front panel by pressig
the top part of the panel onto the
top of the air puri er (1). Then,
gently push the panel against the
body of the air puri er (2) ( g.h).
7
Wash your hands thoroughly after
installing lters.
6 EN
4 Using the
Understanding the air
quality light
Air quality light
color
Blue
Blue-violet
Red-purple
g.c).
Red
The air quality light automatically goes
on when the air puri er is switched on,
and lights up all colors in sequence.
After approximately 30 seconds, the
air quality sensors select the color that
corresponds to the surrounding air
quality of airborne particles.

Switching on and o

1
Put the plug of the appliance in the
wall outlet.
2
Touch
( g.i).
» The appliance beeps.
» The appliance operates under
» After measuring the air quality
» For AC2887, "
appliance
Air quality level
Good
Fair
Unhealthy
Very unhealthy
to switch on the appliance
the general mode by default.
for a short time, the air quality
sensor automatically selects the
color of the air quality light.
" displays on
the screen when the appliance
is warming up. After measuring
the particle matters in the air,
the appliance goes to auto
mode with xx displayed on the
screen ( g. j).