Tabla de contenido
Publicidad
Function
Main Menu
Search
PTZ Control
View
1/4/8/9/16/25/36
Sequence
Add Camera
Wireless Paring
Manual Control
Live Mode
Crowd Distribution
Auto Focus
Image
Sub Port
4.3.4 Wireless Paring
Right-click on the screen and select Wireless Paring. The Wireless Pairing interface is displayed. See Figure
4-72.
The device enters a 120 seconds pairing countdown.
Figure 4-71
Table 4-22
Description
Open Main Menu interface.
Open the SEARCH interface where you can search and play back record files. For
details, see "4.6 Playback and Search".
Open the PTZ interface. For details, see "4.4 PTZ".
Configure the live view screen as a single-channel layout or multi-channel
layout.
Set customized screen split mode and channels. For details, see "4.3.5 Sequence".
Open the Add Camera interface. For details, see "4.1.4.4 Adding Camera".
Right-click Wireless Paring to quickly add IPCs. For details, see "4.3.4 Wireless Paring".
● Select Record Mode, you can configure the recording mode as
Auto or Manual, or stop the recording. You can also enable or disable snapshot
function
● Select Alarm Mode, you can configure alarm output settings.
There are two modes: General/AI mode.
Select enable/disable to start/stop crowd distribution function.
Click to realize auto focus function. Make sure the connected camera supports auto focus
function.
Click to modify the camera properties. For details, see "4.2.4 Image". Click Sub Port, you
can go to control the sub screen.
164
User's Manual
Publicidad
Tabla de contenido
