Before Use; Safety Instructions - JB Systems T3 Manual De Instrucciones

ENGLISH
OPERATION MANUAL
®
Thank you for buying this JB Systems product. To take full advantage of all possibilities, please read these
operating instructions very carefully.
FEATURES

High Torque direct drive motor

Fast start / stop

3 speeds: 33, 45, 78 rpm with quartz lock

3 Pitch adjustment ranges: +/-8% ; +/-12% ; +/-20%

Forward / reverse play

2 Start / stop buttons for maximum flexibility

Selectable phono/line output

Unbreakable white LED target light

Audio Technica cartridge included

All metal S-shaped tone arm assembly with:

Counterweight

Anti-skating adjustment

Lever lift with height adjustment

Adjustable large feet for perfect leveling

BEFORE USE

Check the contents:
Check that the carton contains the following items:

Turntable platter

Slip mat

45-rpm adapter

Counterweight

Head shell

Operating instructions

Cartridge

Connecting cord cinch/cinch

Mains power cable.

SAFETY INSTRUCTIONS:

CAUTION: To reduce the risk of electric shock, do not remove
CAUTION the top cover. No user-serviceable parts inside. Refer
servicing to qualified service personnel only.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use
or the presence of un-insulated "dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence of
important operation and maintenance (servicing) instructions in the literature accompanying this
appliance.
This symbol means: indoor use only.
This symbol means: Read instructions.
 To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
JB SYSTEMS
®
OPERATION MANUAL
This symbol means: Safety Class
II appliance
1/30 T3 TURNTABLE
ENGLISH
 To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when
bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full
performance or may even cause damages.
 This unit is for indoor use only.
 Don't place metal objects or spill liquid inside the unit. No objects filled with liquids, such as vases, shall
be placed on this appliance. Electric shock or malfunction may result. If a foreign object enters the unit,
immediately disconnect the mains power.
 No naked flame sources, such as lighted candles, should be placed on the appliance.
 Don't cover any ventilation openings as this may result in overheating.
 Prevent use in dusty environments and clean the unit regularly.
 Keep the unit away from children.
 Inexperienced persons should not operate this device.
 Maximum save ambient temperature is 40°C. Don't use this unit at higher ambient temperatures.
 Minimum distances around the apparatus for sufficient ventilation is 5cm.
 Always unplug the unit when it is not used for a longer time or before you start servicing.
 The electrical installation should be carried out by qualified personal only, according to the regulations for
electrical and mechanical safety in your country.
 Check that the available voltage is not higher than the one stated on the rear panel of the unit.
 The socket inlet shall remain operable for disconnection from the mains.
 The power cord should always be in perfect condition. Switch the unit immediately off when the power
cord is squashed or damaged. It must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
 Never let the power-cord come into contact with other cables!
 When the power switch is in OFF position, this unit is not completely disconnected from the mains!
 In order to prevent electric shock, do not open the cover. Apart from the mains fuse there are no user
serviceable parts inside.
 Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same
type and electrical specifications!
 In the event of serious operating problems, stop using the appliance and contact your dealer immediately.
 Please use the original packing when the device is to be transported.
 Due to safety reasons it is prohibited to make unauthorized modifications to the unit.
INSTALLATION GUIDELINES:

Install the turntable in a well-ventilated location where it will not be exposed to high temperatures or
humidity.

Placing and using the turntable for long periods near heat-generating sources such as amplifiers,
spotlights, etc. will affect its performance.

When the turntable is used in a loud-sound environment, for example near speakers, sound skip and
feedback may occur.

Install the unit on a perfectly horizontal and very stable surface. A concrete or marble surface is perfect.
A wooden surface is a bad choice while it amplifies vibrations.

Be sure the turntable, including its audio and mains cords, does not touch any vibrating materials. Take
special care when using the unit while it is installed in a carrying case.

Because of its two start/stop buttons the T3 turntable can be used in both traditional and battle style
setups:
Traditional setup:
Mostly used in discotheques.
Best for allround mixing.
CLEANING THE TURNTABLE:
Clean by wiping with a cloth slightly dipped with water. Avoid getting water inside the unit.
Do not use volatile liquids such as benzene or thinner which will damage the unit.
JB SYSTEMS 2/30
®
OPERATION MANUAL
Battle style setup:
Mostly used for scratching and
other aggressive mixing techniques
T3 TURNTABLE