Amplicomms HS 1300 Manual De Instrucciones página 28

O
PERATION
The radio connection between the transmitter and receiver is defective.
In a few cases, external influences can lead to interruptions in the radio con-
nection between the transmitter and receiver. In this case you can then pair
the headphone receiver with the transmitter with the following steps :
1 Turn the power of the transmitter to OFF.
2 Switch the power of the headphone receiver to ON. Press the hold the
sound enhancement selection button for 5 seconds, the green signal LED
will blink.
3 Place the headset receiver onto the transmitter and switch ON the power
of the transmitter. The green signal LED will blink.
4 Within a few seconds, a "Beep" sound can be heard indicating the head-
phone receiver is successfully paired with the transmitter.
24
Helpline UK 0844 800 6503
(See page 29 for costs and hours of operation)