Symbol Indication / Troubleshooting - Levita BD-4603 ALB Manual De Usuario

BD-4603 ALB/ALS
15

Symbol indication / Troubleshooting

Problem Symptom
Display will
no power
not light up.
low Display is dim
batteries or show
E1 shows
E2 shows
E3 shows
E10 or E11
shows
Error
E20 shows
message
E21 shows
EExx,
shows
24
Check this
Batteries are exhausted.
Batteries are inserted
incorrectly.
Batteries are low.
The cuff is not secure.
The cuff is very tight
The pressure of the
cuff is excess.
The monitor detected
motion,talking or the
pluse is too poor
while measuring.
The measurement
process does not detect
the pulse signal.
The treatment of the
measurement failed.
A calibration error
occurred.
Remedy
Replace with new batteries
Insert the batteries
correctly
Replace with new batteries
Refasten the cuff and then
measure again.
Readjust the cuff, not too
loose or too tight and then
measure again.
Relax for a moment
and then measure again.
Relax for a
moment and then
measure again.
Loosen the clothing on the
arm and then measure
again
Relax for a moment and
then measure again.
Retake the measurement.
If the problem persists,
contact the retailer or our
customer service
department for further
assistance.Refer to the
warranty for contact
information and return
instructions.