nor-tec 73493 Manual De Instrucciones página 10

WIRELESS DOORBELL
Pack contains:
1 x bell button
1 x portable doorbell
1 x CR2032 battery
1 x double-sided tape
Functions
No wires required. The bell button is
waterproof.
The receiver/doorbell can be used as
portable units or be � tted to the wall.
Ideal for the hearing-impaired
30 diff erent ring melodies
Easy to change to your preferred melody
Range
Up to 100 metres (in clear range)
Batteries
1 x CR2032 for bell button (supplied)
3 x AA batteries for the portable unit/
receiver/doorbell (not included).
Battery life
With normal use (up to 20 rings per day), the
batteries can last for around 1 year.
10
Instructions
• Insert the battery (CR2032) in the bell
button/transmitter.
• Insert 3 x AA batteries (not included) in
the portable doorbell.
• Mount the doorbell in the required
location using double-sided tape (can
also be screwed to the wall/door frame).
• Open the cover to the bell button/
transmitter and receiver/doorbell.
• Press the "play" button on the transmitter.
Press the button on the receiver at the
same time. After about 15 seconds, it will
ring/play music.
Press the bell button to check. The
doorbell's ring tone/melody should
now be heard if everything is working
correctly. If not, repeat the above
procedure.
• To change the melody, open the cover.
Press Select to choose a diff erent melody.
Note: As the doorbell involves wireless
transmission, it may be disrupted by other
wireless equipment. If this occurs, reset it
by pressing the transmitter and receiver as
described above.