Sissel Heat Wave Instrucciones De Uso página 4

The electric warm water bottle with removable charging unit
SISSEL Heat Wave provides long-lasting, blissful warmth for several hours
®
(depending on application). Just hook up, wait for automatic switch-off and enjoy the
warmth. SISSEL Heat Wave is handy, safe, reliable and versatile – use even while
®
travelling. Refi lling is not necessary. The automatic switch off function cuts the power
at approx. 70° C interior temperature. A 3-layer leakage protection provides extra
safety. The pleasant velours soft touch cover enhances the feeling of warmth.
Features
I
no need to use hot water, no need for dangerous refi lling
I
convenient and easy to use: plug in, disconnect, go
I
stays warm up to 2 hours, under covers up to 6 hours
I
easy to reheat after the product cooled down
I
generously sized
I reusable, environmentally friendly
I
At the fi rst applications, a temporary characteristic
odor might occur. If desired, air the product before use.
Technical specifi cation
I
400 W, AC 220 - 230 V/50 HZ
I
size: approx. 20 x 30 cm
I material: PVC + mercerization/lint
I
contents: water; gross weight: approx. 1.8 kg, with charging port/gift box
Read the following instruction before use.
Directions
I
Place the SISSEL
®
I
Swipe protective cap left or right to expose charging port.
I First insert the charger into the charging port.
Then insert charger into an electric outlet (220 Volt).
I
Always unplug charger when desired temperature is reached.
I
Remove charger according to illustration. No tearing or pulling of charger.
I
Move the cap (protection cap) to its original position.
Venting
A reduction in warming together with an increase in volume can be
corrected as follows: Let the product cool off completely. Carefully remove
the cap of the transparent valve and apply mild pressure onto the cover.
This way excess air escapes from the inside of the warming cushion. Now
re-insert the cap into the valve.
Heat Wave on a smooth and even surface.