Counterweight - Frontgate 42076 Manual De Instrucciones

12. 45 RPM ADAPTOR
Place on center spindle for playing 7" records with large center holes.
13. TONEARM LEVER
Controls the up and down action of the tone arm lift.
14. ANTI-SKATE KNOB
When a record is playing, a force is generated drawing the stylus towards the center of the record. This
control compensates for that force and needs to be set to the same value as the counterweight
pressure ring.

15. COUNTERWEIGHT

Use the counterweight to balance the tone arm and to adjust the stylus pressure.
16. PHONO/LINE OUTPUT
Connect the turntable to any phono or line level input, using the supplied cinch/cinch cable. Be sure to
put the phono/line switch in the right position.
17. AC VOLTAGE SELECTOR
Make sure the selector is set properly.
18. POWER SWITCH
This switch turns the power on or off.
19. POWER CORD CONNECTOR
Used to connect the included power cord.
OPERATIONS
1. Push power button to on.
2. Place a record on the turntable mat. When playing a 45rpm record with a large center hole; place
the 45rpm adapter on the center spindle.
3. Set the rotation speed (33/45) to match the record.
4. Release the arm clamp
5. Set the cueing lever to the up position.
6. Press the Start/Stop button and the turntable platter will start to rotate.
7. Move the tone arm over the desired groove.
8. Set the cueing lever to the down position, the tone arm will descend slowly onto. The record and
play begins.
9. Adjust the pitch to a desirable speed, move the pitch control slider up or down to adjust the speed.
10. To suspend play, lift tone arm with cueing lever.
11. When play is finished, raise the cueing lever, move the tone arm to the arm-rest and secure the
tone arm with the arm clamp.
12. Press the Start/Stop button to stop the platter rotating.
13. Push the Power button to off.
5