OPERATING INSTRUCTIONS- CONTROL FUNCTIONS
TO ACCESS CONTROL PANEL
door to access the control panel.
CONTROL FUNCTIONS
- POWER -
The Main Power Switch supplies power to all
of the functions and will illuminate the flame effect.
This switch must be in the " " ON position for any
of the functions to work.
- HEATER -
Press this switch to turn " " ON or " " OFF
heater output. This switch must be in ON
position for the heater functions to work.
- Open the
knob is rotated clockwise, the higher the set point
temperature will be. Turning the knob counter-
clockwise will lower the set temperature.
WARNING : During any service of this appliance,
the main power switch to the
Fig.3
E-5
- Mechanical Thermostat -
" "
OFF position.