Vision TM-CAGE TECHMOUNT Manual De Usuario página 11

Step 2:
Turn lock 90°. Locate locking pin over the 8mm hole on the top surface of the access
prevention collar.
Step 3:
Push the lock to close it.
LOCK INSTRUCTIONS
The lock comes with 6 x LR44 (AG13) batteries pre-installed in each lock.
1. When locked, the lock will beep once to confirm it is armed. Then after 15 seconds it
will become active.
2. When the lock is moved it will give 3 warning beeps. After 5 seconds of continued
movement the alarm will sound.
3. When the alarm is sounding, if movement ceases for 35 seconds the alarm will stop
sounding and return to active mode.
9