Installation; Unpack The Machine; Install The Spray Wand; Install The High Pressure Hose - GreenWorks GPW 1501 Manual Del Operador

SYM- SIGNAL
BOL
CAUTION
3

INSTALLATION

3.1

UNPACK THE MACHINE

WARNING
Make sure that you correctly assemble the machine
before use.
WARNING
• If the parts have damage, do not use the machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the
service center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with
local regulations.
3.2

INSTALL THE SPRAY WAND

7
12
1. Push the end of the spray wand into the gun handle.
2. Turn the spray wand clockwise until the tabs lock
into position.
WARNING
Make sure that the connection has no leakage.
English
MEANING
(Without Safety Alert Sym-
bol) Indicates a situation
that may result in property
damage.
6
3.3 INSTALL THE HIGH PRESSURE
HOSE
9
8
1. Push and turn clockwise one end of the high
pressure hose into the inlet coupler.
2. Install and tighten the other end of the high pressure
hose onto the water outlet coupler.
4

OPERATION

WARNING
Make sure that all the connections are tight and have
no leakage before operation.
4.1 CONNECT THE WATER SUPPLY
TO THE MACHINE
For easy operation, please use a self-coiling garden
hose (not provided).
WARNING
When you operate the self-coiling hose, make sure
that the hose has no blockage.
WARNING
• The water supply must come from the water main
• Do not use hot water
• Do not use water from ponds or lakes
WARNING
Do the local regulations when you connect the garden
hose to the water supply. Direct connection through a
receiver tank or backflow preventer is usually
permitted.
Inspect the filter in the water inlet connector before
you connect the garden hose
• If the filter is damaged, do not use the machine
until the filter is replaced.
• If the filter is dirty, clean the filter.
7
4
CAUTION
EN