Premier COMP-4212L Manual De Instrucciones página 14

3.3 Touchpad
Built-in touchpad is positioning equipment that compatible with PS/2. You may feel its surface is
moveable, the cursor will move along with your finger.
3.4 Screen
To make your eyes comfortably, we adopt TFT LED screen for the computer. It supports high resolution
true color, can bring you extraordinary visual.
Please follow below rules for extending the life of display
1. Set LCD brightness as lowest comfortable brightness
2. Please add an external LCD and close laptop screen when using on desk
3. Don't close power system to enter into pause mode.
4. If using DC power but without add an external LCD, don't switch to pause when not use
attention To extend your battery life ,please adjust brightness to the lowest on premise of watching
comfortably .For saving power.
3.5 Network card
There is a built-in USB transfer to RJ45 connector. Via this RJ45 connector, it can meet 10/100Base-TX
standard Ethernet card. Install the convertor's driver first, and then plug the one end of LAN to RJ-45 of
the convertor, then you could transfer date online here.
Open / close wireless network
Your computer installs built in wireless card, please set and join as operation system indication (please
consult with your local networker). And please notice your computer need to connect with wireless
network in certain time.
4 BIOS (basic input and output system) Settings
In this chapter, we will instruct you enter BIOS to setup procedures and
hardware settings. You could learn how to use the built-in security protection settings.
[public setting procedure] is a hardware status procedure built in
out and maintain many hardware functions. It is a kind of software by making use of menu mode to
operate, allowing you to set and change settings easily
BIOS include pre laptop factory settings. However you still have chance to change BIOS pre-settings
.When there is hardware changes, such as
BIOS could let you set password for controlling user storage, this is important function because
present laptop store a lot of information .Storage without authorization could be prevent
P-12
various kinds
laptop BIOS It could carry
upgrade, temporary status or you decide to set hardware
4.1 Method of BIOS Setup
The situation which you must carry out the BIOS setup include
Display shows information to require you carry out BIOS settings when
problem.
You need to reset the default value.
You need to change default value upon certain hardware.
You need to change default value to get the best system function.
If you plan to do BIOS setup, you need to press Delete key when powering
How to select
TO one items, you need to through 2 or 3 steps to finish setup. Most of
pass 3 steps. Menu titles drop-down menu and
Making use of the keyboard to move and select. You can see keyboard
bottom of the screen.
4.2 Main settings
of
System Time
System Date
SATA Port 0
SATA Prot 2
System Memory
Extended Memory
power on test and find
on the computer.
these options must
sub-menu.
information on the right
P-13