Beper 90.380 Manual De Instrucciones página 10

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Induction cooker Use instructions
• Always fully unwind the mains cable and the extension cable.
• Make sure that the mains cable does not hang over the edge of a worktop and cannot be caught
accidentally or tripped over.
• Keep the mains cable away from heat, oil and sharp edges.
• Do not use the appliance if the mains cable or the mains plug is damaged or defective. If the mains
cable or the mains plug is
damaged or defective, it must be replaced by the manufacturer or an authorised repair agent.
• Do not pull the mains cable to disconnect the mains plug from the mains.
• Disconnect the mains plug from the mains when the appliance is not in use, before assembly or
disassembly and before cleaning and maintenance.
Safety instructions for induction cookers
• Do not use the appliance outdoors.
• Place the appliance on a stable and flat surface.
• Place the appliance on a heat-resistant and splash-proof surface.
• Do not place the appliance on a hob.
• Make sure that there is sufficient space around the appliance to allow heat to escape and provide
sufficient ventilation.
• appliance does not come into contact with flammable material.
• Keep the appliance away from heat sources.
• Do not cover the appliance.
• Do not place a sheet of paper between the cookware and the hotplate to prevent the paper from
being burnt.
• The accessible surfaces of the appliance can become very hot during use. Do not touch the hot
hotplate.
• The hotplate becomes very hot during use.
Do not touch the hotplate directly after removing the cookware.
• The cookware becomes very hot during use. Use oven gloves to remove the cookware from the
hotplate.
• Metallic objects such as knives, forks, spoons and lids should not be placed on the hotplate since
they can get hot.
• The hotplate is made of tempered glass. Do not use the appliance when the hotplate is damaged.
If the surface is cracked, switch off the appliance to avoid the possibility of electric shock.
• Do not place empty cookware on the hotplate. Heating empty cookware will activate the overhea-
ting protection and the appliance will switch off automatically.
• Do not place objects that are affected by magnets (radios, televisions, bank cards, etc.) near the
appliance.
• Do not move the appliance while it is switched on or is still hot. Remove the mains plug from the
wall socket and wait until the appliance has cooled down.
FUNCTION DIAGRAM Fig. 2
1-Timer
2-Keep warm
3-Functions selector
4-On/off switch
5-Temperature adjustable buttons +/-
6-Digital display
10

Publicidad

Tabla de contenido
loading

Tabla de contenido