Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Specifications and Safety
DESCRIPTION
This Submersible Sump Pump is designed for home
sumps. Unit is equipped with a 3-prong grounding-type
power cord. Shaded-pole motor is oil filled and sealed
for cooler running. Sleeve bearings on motor shaft never
need lubrication. Automatic reset thermal protection.
SPECIFICATIONS
Power supply required ...........................115V, 60 HZ.
Motor duty ..............................................continuous*
Liquid Temp. Range ................32°F to 70°F(0°-21°C)
Individual Branch Circuit Required (min.) ....15 Amps
Discharge:
Plastic Models............1-1/4" FNPT / 1-1/2" MNPT
Cast Iron Models ...............................1-1/2" FNPT
*NOTICE: For continuous operation, water depth
must be at least 5" (13 cm), to prevent motor over-
heating.
NOTICE: This unit is not designed for applications
involving salt water or brine! Use with salt water or
brine will void warranty.
Pump water only with this pump.
PERFORMANCE
GPH (LPH) AT TOTAL FEET (M)
Motor
5
Series
HP
(1.5m)
CAPACITY GALLONS(L)/HOUR
FP0S1800A
2280
1/4
FP0S1800LTS
(8 631)
(6 132)
FP0S2400A
2760
1/3
FP0S2450A
(10 448) (8 176)
FP0S3200A
3200
1/2
FP0S3250A
(12 113) (10 220) (7 571)
FPSC2200A
2800
1/3
FPSC2250A
(10 599)
(8328)
FPSC3200A
3200
1/2
FPSC3250A
(12 113) (10 220) (7 570)
ELECTRICAL & SWITCH SPECIFICATIONS
Individual
Motor
Branch
Motor Full Load
Circuit
Series
HP
Amps
Req.(Amps)
FP0S1800A
1/4
8.5
15
FP0S1800LTS
1/4
8.5
15
FP0S2400A
1/3
9.0
15
FP0S3200A
1/2
13.0
15
FPSC2200A
1/3
9.0
15
FPSC3200A
1/2
13.0
15
FP0S2450A
1/3
9.0
15
FP0S3250A
1/2
13.0
15
FPSC2250A
1/3
9.0
15
FPSC3250A
1/2
13.0
15
For parts or assistance, call Flotec Customer Service at
GENERAL SAFETY INFORMATION
Electrically powered sump pumps normally give
many years of trouble-free service when correctly
installed, maintained, and used. However, unusual
circumstances (interruption of power to the pump,
dirt/debris in the sump, flooding that exceeds the
pump's capacity, electrical or mechanical failure in
the pump, etc.) may prevent your pump from func-
tioning normally. To prevent possible water damage
due to flooding, consult your retailer about a sec-
ondary AC sump pump, a DC backup sump pump,
and/or a high water alarm. See the "Troubleshooting
Chart" in this manual for information about common
sump pump problems and remedies. For more infor-
mation, see your retailer, call Flotec customer
service at 1-800-365-6832 or visit our website at
www.flotecwater.com.
1. Know the pump application, limitations, and
potential hazards.
2. Do not use in water with fish present.
3. Disconnect power before servicing.
4. Release all pressure within system before servic-
ing any component.
5. Drain all water from system before servicing.
6. Secure discharge line before starting pump. An
unsecured discharge line will whip, possibly
No flow
10
15
causing personal injury and/or property damage.
at height
(3m)
(4.6m)
shown
7. Check hoses for weak or worn condition before
below
each use, making certain that all connections are
1620
660
18 Ft.
secure.
(2 498)
(5.5M)
8. Periodically inspect sump, pump and system
2160
1410
20 Ft.
components. Keep free of debris and foreign
(5 337)
(6.1M)
objects. Perform routine maintenance as
2700
2000
24 Ft.
required.
(7.3M)
9. Provide means of pressure relief for pumps whose
2200
1400
20 Ft.
discharge line can be shut-off or obstructed.
(5299)
(6.1M)
10. Personal Safety:
2700
2000
24 Ft.
(7.3M)
a. Wear safety glasses at all times when working
b. Keep work area clean, uncluttered and prop-
*Switch Setting
c. Keep visitors at a safe distance from work
in inches (mm)
On
Off
11
3
⁄
"(298) 4
1
⁄
"(114)
4
2
d. Make workshop child-proof – with padlocks,
11
⁄
"(298) 4
⁄
"(114)
3
1
4
2
13"(330)
6"(152)
13"(330)
6"(152)
13"(330)
6"(152)
11. When wiring an electrically driven pump, follow
13"(330)
6"(152)
all electrical and safety codes that apply.
8"(203)
4"(102)
12. This equipment is only for use on 115 volt (sin-
8"(203)
4"(102)
gle phase) and is equipped with an approved
8"(203)
4"(102)
3-conductor cord and 3-prong, grounding-type
8"(203)
4"(102)
plug.
with pumps.
erly lighted – replace all unused tools and
equipment.
area.
master switches, and by removing starter
keys.
1-800-365-6832
2
Publicidad
Tabla de contenido
