Troubleshooting - Kobra +1 SS4 Instrucciones De Manejo

If you have any problems with your shredder, check the symptoms and solutions below. If this fails to solve the problem,
contact your nearest Kobra dealer.
Do not open the head of the shredder to try to repair it yourself. You could expose yourself to the risk of serious
electrical shock and also invalidate your guarantee.
PROBLEM
The shredder does not
start up
The shredder never
stops
Notable reduction in
shredding capacity
(only on Kobra +1CC4)
i : -
n aCCordanCe witH direCtive
-
direCtive
-
direCtive
t : elComan Srl
He manUfaCtUrer
via GoriZia,9
20813 BoviSio maSCiaGo (mi) - italY-
d
eClareS HerewitH tHat tHe followinG paper SHredderS ComplY witH tHe StandardS of tHe
KoBra : K +1
SerieS oBra
a :
pplied StandardS
EN 60950-1:2006 / A11:2009 /A1:2010/A12:2011
EN 55014-1 :2006
EN 55014-2 :1997 + A1 :2001
B m , 16.12.13
oviSio aSCiaGo
a.de roSa
t o
eCHniCal ffiCe
WHAT YOU SEE
- The ENERGY SMART Optical
indicator light (B) does not
come on
- ENERGY SMART Optical
indicator light (B) comes on
- The machine fails to start when
paper is inserted into the throat
- Optical Indicator Light (B) is on,
blades operating
- Reduced capacity compared
with oiled cutting blades
D
eclaration of
lvd 2006/95/Ce
2011/65/eU r HS
o
2004/108/Ce Cem
TROUBLE SHOOTING
CAUSE
- Switch is in (A) position.
- Waste paper bin (2) not
positioned properly on the
STAND (4)
- Motor in overheat
protection mode
- Cable not connected
properly
- No electrical power
- Material and/or dirt
deposited on photocells (C)
- Cutting blades not oiled
c
onformity
lvd d
EN 61000-3-2 :2000/A2 :2005
EN 61000-3-3 :1995/A2 :2005
EN 61000-4-2 :1995/A2 :2001
EN 61000-4-3 :2006
8
ACTION
- Change switch to FWD position.
- Push the paper bin fully into the
stand.
- Wait 15 minutes for the motor
to cool down.
- Check that the plug is plugged
into the socket correctly.
- Check that there is power to the
socket.
- Remove deposit from
photocells.
- Oil the cutting blades.
2006/95/Ce
ireCtive
EN 61000-4-4 :2004
EN 61000-4-5 :2006
EN 61000-4-6 :1996/A1 :2004
EN 61000-4-11 :2004