Tabla de contenido
Publicidad
Operating Elements -
•
Insert the provided battery to the battery
compartment. The metal contacts should face
toward the camera.
•
Lever the latch to pull the battery out�
Make sure the battery is locked in place�
1� Connect the camera to a USB port through USB
cable� The status indicator will flash green and
red alternately and two beeps will be generated.
2� When charging is finished, the status indicator
turns green and a long beep will be generated.
Remove the camera from the USB port.
Recharge the battery when the status indicator
flashes green. The battery is low.
Please fully charge the battery before first use.
ATCMini – 6
Battery Installation & Charging
Publicidad
Capítulos
Tabla de contenido
