Operation And Controls - Princess 2954 Instrucciones De Uso

General
This attractive Princess New Classics
Kitchen Scale is one of the products in our
New Classics range, all of which are
finished in sturdy chrome-plated steel. You
can use your Kitchen Scale to weigh
products to 5000 g/176 oz. It also includes
a handy kitchen timer.
Operation and
controls
See Figure 1.
The appliance is equipped with the
following features:
1 On/off and reset button
2 g/oz and start/stop button
3 Timer -
4 Timer +
5 Weighing platform
6 Cover
7 LCD display
8 Cover for four 1.5 V batteries
9 Container for loose products.
See Figure 2.
The LCD display has the following
functionalities:
1 Battery indicator
2 Units of weight (g or oz)
3 Units of time (min and sec)
4 Display of weight or time
5 Spanner (in the event of malfunction)
6 Minus sign (for negative weight)
7 Indicator for timer mode.
4 New Classics Kitchen Scale Article 2954
Before use for the first time
See Figure 3.
1 Remove the packaging.
2 Remove the battery cover at the rear of
the appliance.
3 Fit four 1.5 V batteries as indicated on
the appliance.
4 Fit the cover to the battery
compartment.
Use
• Place the appliance on a hard and
level surface, as free from vibration as
possible.
• Put the appliance in a place where it
cannot fall off the worktop.
Weighing products
1 Open the cover.
2 Press the on/off and reset button to
switch on the appliance. '888' will be
shown on the display, and '0g' will then
be shown after 1 second (default
display).
3 Press the g/oz and start/stop button to
switch between g and oz. The selected
unti is shown at the top of the display.
You can change units at any time you
wish.
4 To weigh loose products such as rice,
slide the container out of the front of the
appliance and put it on the weighing
platform.
5 Reset the appliance by briefly pressing
the on/off and reset button. This sets
the weight to '0'. You can use this
button at any time you wish.
6 Put the product on the weighing
platform or in the container (where
relevant). On weighing product with a
weight of more than (5000 g/176 oz)
'EEEE' will be shown in the display.
Reset the appliance by pressing the on/
off and reset button. The default display
will be shown. You can now weigh a
new product using the above
procedure.