Bluetooth Audio - Lenco PMX-160BK Manual Del Usuario

USB/MICRO SD CARD OPERATION
Reading and Playing USB Device (or Micro SD Card)
Insert an USB device into the USB A input jack. It will automatically go to USB A mode. After initial reading, the playback will start
automatically.
Insert a Micro SD card into the MICRO SD slot. It will automatically go to Card mode. After reading, the playback will start
automatically.
Play/Pause Control
To pause playback press the [A
Skip Track
Press the [A PREVIOUS
Repeat Play
During playback press the
When pressing the button again, the display shows "rdO". All tracks will be played in random sequence.
When pressing the button again, the display shows "OnE". The current track will be played repeatedly.
When pressing the button again, the display shows "FOd. All tracks in the folder will be played repeatedly.
When pressing the button again, the display shows "OFF". The unit will resume to normal playback without any repeat operation.
Folder Up/Down
Press & hold the [A PREVIOUS
Note: For the USB B, the operation is similar as USB A, but USB B is controlled by the [B
buttons.

BLUETOOTH AUDIO

Please follow the pairing instructions below to link the PMX-160 unit to your Bluetooth device.
1. Press the [MODE] button repeatedly to enter the Bluetooth mode. The display will show "bLUE" with a small letter "A" turned on
as well. The display will flash and start searching.
2. If the unit has never been paired with a Bluetooth device before or cannot find the last paired device, the display and the
Bluetooth status indicator will keep on flashing. Turn on the Bluetooth function of your device and scan for new devices until
"Lenco PMX-160_A" is found. Select "Lenco PMX-160_A" on the Bluetooth device to make connection. Enter the pass code
"0000" if required.
3. After successfully paired the unit will display steady "bLUE".
4. You can now start playing music from your smartphone wirelessly to the speaker.
5. You can press the [A
6. You can press the [A PREVIOUS
To connect the second Bluetooth device:
1. Press the [BT A/B] button to enter the Bluetooth B mode. The display will show "bLUE" with a small letter "B" turned on as well.
The display will flash and start searching.
2. If the unit has never been paired with a Bluetooth device before or cannot find the last paired device, the display and the
Bluetooth status indicator will keep on flashing. Turn on the Bluetooth function of your device and enable the search until "Lenco
PMX-160_B" is found. Select "Lenco PMX-160_B" on the Bluetooth device to make connection. Enter the pass code "0000" if
required.
3. After successfully paired the unit will display steady "bLUE".
4. You can now start playing music from your smartphone wirelessly to the speaker.
5. You can press the [B
6. You can press the [B PREVIOUS
Note:
To disconnect the current Bluetooth connection and pair another Bluetooth device, select de Bluetooth connection A or B with the BT
A/B button and longpress the [A
Bluetooth connection B. Now you can search for new BT devices on your other BT player device and search for "Lenco PMX-160_A" or
"Lenco PMX-160_B" as desired.
LINE IN
This allows you to connect an external player's sound through your unit.
1. You need to plug in a 3.5mm audio cable (included) first into the unit's LINE IN terminal.
] button. Press the button again to resume playback.
] or [A NEXT ] button to search to the previous or next track.
button once, the display shows "ALL". All tracks will be played repeatedly.
] or [A NEXT ] button will change to go to the folder down or up operation.
] button to pause or resume the playback.
] or [A BT NEXT
] button to pause or resume the playback.
] or [B BT NEXT
] button to disconnect Bluetooth connection A or longpress the [B
] button to search to the previous or next song.
] button to search to the previous or next song.
11
], [B PREVIOUS ] and B NEXT
] button to disconnect
]