Take the frame out of the box. Release the fold lock and open the frame, lifting upwards by hol-
1
ding the handlebar until the frame is in the right position.
Take the front wheels out of the box. Place the front wheels into the fitting. The assembly is com-
2
plete when you hear a clicking noise.
Put the attached elements of the frame into the attachment points of the rear wheel axis.
3
Put the bumperbar into the attachment points of the chassis until you hear a clicking noise to lock
4
it in.
Place the attachable elements of the seat unit into the attachment points on the chassis and press
5
the seat unit downwards until you hear a click on both sides.
Push the unlocking buttons to remove the seat unit upwards.
6
Be careful: The seat unit is now unlocked.
Slide the unlocking buttons upwards to change the position of the seat unit.
7
To fix the raincover, put the velcro around the chassis and stick it together.
8
Push the two side parts of the belt into the attachment point of the middle part of the belt to
9
lock the belt.
Push the unlocking button to separate the three parts and unlock the belt system.
To adjust the belt system in length or shorten it tear the belt through the clip.
10
To open the hood, pull it frontwards.
11
Pull the hood backwards to fold it.
To lock the brake, put your foot onto the pedal and push it downwards.
12
If you want to lock the swivel function push the button downwards.
13
To unlock the swivel wheel, push the button upwards.
Slide the unlocking buttons upwards and pull the handle downwards until it latches to fold the
14
chassis.
Fold the canopy, slide the unlocking buttons upwards and pull the handle downwards until it
15
latches to fold the stroller with the seat unit.
Important — Keep these instructions for future reference.
Compatible with SHIMA for ONIDA.
Do NOT use another mattress as provided by the manufacturer.
Warnings, safety instructions, maintenance, disposal and guarantee can be found in the warnings
booklet.
8
INSTRUCTIONS