G E N E R A L I N F O R M A T I O N - Hitecsa CED 11.1 Instrucciones De Instalación, Funcionamiento Y Mantenimiento

G E N E R A L I N F O R M A T I O N

DEFINITION OF MACHINE SERIES AND CODES
•
CED series vertical precision air-conditioning units used for standard applications.
•
CEM series vertical precision air-conditioning units used for standard and for special applications.
•
CEW series chilled water precision air-conditioning units.
1.1 IDENTIFICATION
15... - size of the unit (standard unit is DOWNFLOW)
/A - indicates the unit is UPFLOW
CONF. - indicates the configuration of the unit
CONF. SERIES
1 CED, CEM
2 CED, CEM
3 CED, CEM
4 CED, CEM
5 CEW
6 CED, CEM
7 CEM
8 CEM
9 CEM
HR CEM
The units belonging to the above configurations can be equipped with the following accessories:
- electrode steam humidifier
- one or more stage electric heaters
hot water coil
-
hot gas coil (only on CED, CEW and CEM in config. 1 & 2)
-
fresh air intake
-
low ambient kit to control condenser fan speed (config. 2 & 4)
-
- Electronic temperature and relative humidity microprocessor control (see description and instructions in relevant
manual).
05.08 Ref.200989 Rev.100
DESCRIPTION
water-cooled version with plate condenser and compressor in the indoor unit, open circuit
air-cooled version with compressor in the indoor unit and remote air-cooled condenser
water-cooled split version with compressor and water-cooled condenser as outdoor unit
air-cooled split version with compressor and air-cooled condenser as outdoor unit
chilled water version
glycol & water-cooled version with compressor and plate condenser within the indoor unit
(closed circuit)
"Dual Cool" units with two cooling systems, chilled water and also direct expansion
"Cool Recovery" units with free-cooling capabilities in mid-season and winter
heat pump units
units with desuperheater for the production of hot sanitary water
29