Installation Method - Trevi XCD 5760 USB Manual De Uso

ENGLISH
20. MMC/SD CARD SLOT
When you need to play the file in the MMC/SD card, insert the MMC/SD card into the
MMC/SD card slot. The system will change into the MMC/SD mode automatically,
and then play the first file in the MMC/SD.
Note:
When MMC/SD card and USB stick are both inserted into their slot or socket, the
system will change into the playback mode of the latter one.

INSTALLATION METHOD

This is an anti-theft installation method.
The main unit wears a METAL MOUNTING SLEEVE.
Please connect the wiring, eg, the Power supply, the Speakers and the Antenna
according to the requirements of this Instruction Manual, then install the metal mounting
sleeve into the car as per the diagram illustrated below.
METAL
SUPPORT STRAP
To remove the CD player out of the mounting sleeve,
insert the two supplied keys into the left and right side
slots of the chassis at the same time.
NOTE
Before installing and operating
the CD player, remove the metal
mounting sleeve illustrated by
the arrows.
om
To raise the anti-skip capability of the unit,
please ensure the metal support strap is
connected firmly to the car chassis.
DASHBOARD
METAL MOUNTING SLEEVE
Remove the two screws that protect
the CD player during transportation
before operating the player.
To properly fix the metal mounting
sleeve, bend the tabs of the sleeve
against the DASH BOARD with a
screwdriver.
UNIT CHASSIS
To attach the removable faceplate, insert the
right side of the faceplate into the right of the
CD player chassis first. Then push the left side
of the faceplate into the chassis until you hear
it click . " "
Page 7
15
XCD 5760 USB
PLASTIC TRIM RING
FRONT PANEL