Cleaning The Nebulizer After Each Use; Cleaning The Nebulizer Daily; Replacing The Medication Cup - Lumiscope 6700 Manual Del Usuario

Cleaning the Nebulizer After Each Use

WARNING: To prevent possible risk of infection from contaminated medi-
cation, clean the nebulizer as follows after each treatment .
1. Ensure the plug is disconnected from the device's power socket.
2. Remove the top cover, nebulization chamber, air-flow chamber, and
medication cup from the device. Remove the filter from the cover.
3. Completely empty the conduction liquid in the reservoir.
4. Wipe the main unit with a clean, soft, moistened cloth.
5. Wash the top cover, nebulization chamber, air-flow chamber, mouth-
piece, masks, and medication cup in warm, soapy water, and rinse
thoroughly. Allow to air dry. Store in a clean, dry location.

Cleaning the Nebulizer Daily

WARNING: To prevent possible risk of infection from contaminated medi-
cation, clean the nebulizer as follows daily .
Once daily, after washing as above, soak the washed components in a
fresh solution consisting of one part warm water and one part white
vinegar for 30 minutes followed by a warm water rinse. Allow to air dry.
Store in a clean, dry location.

Replacing the Medication Cup

Replace the medication cup after every two treatments. There is a pack-
age of 20 replacement medication cups supplied with the nebulizer.
Additional medication cups can be purchased from Graham-Field.
14
6700-INS-LAB-RevA08.indd 14
20 Replacement
Medication Cups
1/27/09 4:58 PM