Taking Pictures - Velleman CAMCOLVC8N1 Manual Del Usuario

• Press and hold the ON/OFF button [1] for 4s to switch the device
off.

Taking pictures

• Point the camera [5] towards the field of interest.
• Press the control button [3] shortly. The status LED [6] switches
off and on again.
Recording
• Point the camera [5] towards the field of interest.
• Press and hold the control button [3] for 3s. The status LED [6]
flashes 3 times and switches off. The device is now recording. The
recorded format is AVI.
• Press the control button [3] again to stop recording. The LED [6]
turns orange again. Note that this might take a few seconds.
Note: when the memory is full or battery power becomes low, the
current file is saved and the device powers off automatically
Play back
• Connect the included USB cable to the USB port [7] and insert the
other end into a USB port of a computer (not incl.).
• The status LED [6] will light up orange and the device will now act
as a regular USB memory device. Copy, open or delete the
recordings as you would with other files on your computer system.
Note: stop the USB device in the appropriate way before
disconnecting from the US port.
Charging
• When the status LED [6] is flashing slowly, battery power is low.
• The battery charges when the device is connected to a powered
USB port or USB power adaptor (not included).
Reset
• When the device does not react anymore, use a small pin (e.g. a
paper clip) to gently press the reset-button [8].
7. Update system time
1. Create a text file named TAG.txt.
2. In that text file, enter the date and time in the following format:
[date]
YYYY/MM/DD
hh:mm:ss
(YYYY=year, MM= month, DD= date, hh=hour, mm=minutes,
ss= seconds)
3. Plug the CAMCOLVC8N into the USB port of your PC.
V. 01 – 05/03/2012
CAMCOLVC8N1
4 ©Velleman nv