Improving Reception; To Avoid The Electromagnetic Interference - Sony HWS-AV10K Manual De Instrucciones

Improving reception

To avoid the electromagnetic interference

HWS-AV10K
2.4 GHz range 2.4 GHz range
wireless equipment wireless equipment
Cordless phone Cordless phone
Bluetooth
If this unit or other equipment does not work correctly
Try one or both of the following procedures.
1
Change the frequency (CHANNEL switch) to another frequency.
CHANNEL
Channel 1 : 2.415 GHz
Channel 2 : 2.429 GHz
Channel 3 : 2.443 GHz
Channel 4 : 2.457 GHz
You can avoid conflicts between this unit and other equipment by changing the CHANNEL
switch on the rear of this unit. See the table at above for the frequency settings.
Important
Make sure to set the CHANNEL switch of the transmitter and receiver to the same position.
2
Move the dedicated antenna away from other equipment.
When you are using the dedicated antenna close to other equipment, electromagnetic
interference may occur. Move the dedicated antenna away from other equipment.
Wireless LAN Wireless LAN
system system
equipment
R
This unit uses a 2.4 GHz frequency
range. This is the same frequency
range as the one used by wireless
LAN equipment, cordless phones,
Bluetooth equipment, microwave
ovens and other wireless equipment.
If you use this unit together with such
equipment, interference may make
the image or sound noisy.
US
11