Imetec M5001 Instrucciones De Uso página 17

Plancha para pelo
Ocultar thumbs Ver también para M5001:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 21
that the straightener is heating. The °C becomes steady when the
temperature set is reached. The straightener is ready to use.
NOTE: The temperature can be selected between 140°C and 220°C.
During selection (Selection) (5), the temperature varies ascending up
to a maximum of 220°C which then starts again at 140°C; the display
remains pale pink. When the desired temperature has been confirmed,
the display turns a shade of colour that is more or less intense
depending on whether the temperature selected is higher or lower.
If you wish to enable the key lock, press (Off/On/Confirm) (6) twice
quickly. The padlock appears on the display. This function prevents
accidental temperature changes while using the straightener. To disable
the key lock, press (Off/On/Confirm) (6) twice again quickly.
Take a thin lock of hair, the same width as the plate and place it between
the two plates.
Keep the lock of hair taut with one hand and, with the other hand, slide
the closed plate from the roots down to the ends.
In manual mode it is recommended to start styling by setting the lowest
temperature and gradually increasing it according to the desired style.
If you wish to select the intellistyle mode press back (4) twice and follow the
indications in the INSTRUCTIONS FOR USE paragraph; Intellistyle mode.
Intellistyle mode
To select your hair type repeatedly press (Selection) (5).
Hair type
Press (Selection) (5) and the icons flash one after the other. To select
the icon corresponding with your hair type, press (Off/On/Confirm) (6).
The icon becomes steady on the display and the other two disappear.
Hair thickness
Press (Selection) (5) and the icons flash one after the other. To select
the icon corresponding with your hair thickness, press (Off/On/Confirm)
(6). The icon becomes steady on the display and the other two disappear.
If you wish to change your selection press back (4) and repeat the
selection.
During heating of the straightener, the range of symbols lights up in
succession and the display changes intensity of the colour until the
temperature for the hair type selected has been reached. The range is
steady. The straightener is ready to use.
If you wish to enable the key lock, press (Off/On/Confirm) (6) twice
quickly. The padlock appears on the display. This function prevents
accidental temperature changes while using the straightener. To disable
the key lock, press (Off/On/Confirm) (6) twice again quickly.
3166_M5001_.indd 15
Straight hair
Fine
Wavy hair
Medium
15
EN
Curly hair
Thick
06/06/18 11

Publicidad

Tabla de contenido
loading

Tabla de contenido