Technical Data - SKF TIH 030m Instrucciones De Uso

2.2 Technical data

TIH 030m
Voltage (± 10%)
Recommended line protection
Power consumption (maximum)
Temperature control
Probe type
Probe maximum temperature
Time mode
Power range
Demagnetization
Overall dimensions (w x d x h)
Area between supports (w x h)
Coil diameter
Weight (with yokes)
Workpiece maximum weight
Maximum heating temperature
m *
20
Standard yoke dimensions:
45 x 45 x 215 mm (1.7 x 1.7 x 8.4 in)
28 x 28 x 215 mm (1.1 x 1.1 x 8.4 in)
14 x 14 x 215 mm (0.6 x 0.6 x 8.4 in)
*m represents the weight (kg) of the heaviest SRB 231 bearing that can be heated from
20
20 to 110 °C (68 to 230 °F) in 20 minutes.
SKF TIH 030m
230 V / 50 - 60 Hz or 110 V / 50 - 60 Hz
10 A fuse rating for 230 V
20 A fuse rating for 110 V
2,0 kVA
0 - 250 °C (32 - 482 °F); in steps of 1°
Thermocouple, K type
250 °C (482 °F)
0-60 minutes; in steps of 0,1 minute
100% - 50%
automatic; residual magnetism <2A/cm
460 x 200 x 260 mm (18.1 x 7.9 x 10.2 in)
100 x 135 mm (3.9 x 5.3 in)
95 mm (3.7 in)
For minimum bearing bore diameter of
100 mm (3.9 in)
20,9 kg (46.0 lbs)
bearing: 40 kg (88 lbs);
solid component: 20 kg (44 lbs)
approx. 250 °C (482 °F)
Depending on bearing or workpiece weight.
For higher temperatures, please contact SKF.
28 kg (bearing 23136)
For minimum bearing bore diameter of:
65 mm (2.6 in)
40 mm (1.6 in)
20 mm (0.8 in)
7