Westfalia 306 204 300 113 Instrucciones De Montaje página 25

Insert the two continuous positive wires (red, red/black) of the wire lane and of the enclosed
single wire into the enclosed fuse holder.
Clip the yellow secondary locks from below into the centre of the fuse holder.
For the Lancia, connect the single wires to the positive terminal of the battery and for the Strada,
insert the compact plug into socket B of the main electrical system.
Insert the two fuses in the fuse holders and put the protective cap in place.
9. Secure the placed wires with cable binders.
Re-install removed parts, re-connect earth on vehicle.
Check all functions with a suitable testing instrument (with load resistance) or with a towed vehicle!
Allocation of the 13-pin socket
Circuit
Left turn signal lamp
Rear fog lamp
Earth (circuit 1-8)
Right turn signal lamp
Right tail light
Stop light
Left tail light
Back light
Continuous positive
Charge line
Earth (circuit 10)
Not assigned
Earth (circuit 9)
The non-assigned 3-pin socket is for the adaption of a separate continuous positive line set. This
can, if desired, be obtained from a Westfalia dealer.
Wire
black/white
white
brown
black/green
gray/red
black/red
gray/black
green
red
yellow
brown/white
--
brown
Contact
1
2
3
4
5
6
7
8
9
10
11
12
13
GB
25