Fermax LYNX Manual De Instalador página 23

• Status LEDs: Status LEDs are all turned on by the BIOS on power up. The BIOS will
turn off LED 2 before booting the operating system. The left and right leds blink in
green when the status is ok. The middle led is only on when rebooting the system.
o CPU: Shows CPU activity.
o HDD: Shows HDD activity
o NET: Shows netword activity.
• RESET BUTTON: Reset the system to defaults. The reset button must remain
pressed for ten seconds. Then you have to wait until the lights go out completely
and the lights turn back on.
11
LYNX ROUTER