Functions With The Fermax Entry System; Door Opening - Fermax 1100 Manual De Usuario

Symptoms
-
Handset cannot link
up with the base sta-
tion
- No ring tone on the
handset
-Buzzing noise on my
radio, TV computer or
hearing aid

FUNCTIONS WITH THE FERMAX ENTRY SYSTEM,

This telephone along with the FERMAX DECT Outdoor Panel
makes up the FERMAX DECT Entry System, offering a series of
additional functions:
Outdoor panel communication
If we wish to communicate with the FERMAX Outdoor Panel from
the FERMAX DECT Telephone without having received a call from
the panel, we press:
* Press 2 +
If no key is pressed the communication will be cut off after 15
seconds, avoiding the system remaining activated if we make a call
accidentally.

Door opening

During a call or when we have established communication with out-
door panel, we can open the door if we press
Possible Cause
- Out of Range
- Low battery
- You are using more
than 1 base
- The ringer volume
may be switched off
-The telephone may
interfer with other elec-
trical equipment if they
are too close
Int.
Solution
- Try to go closer to
base
- Charge battery
- Check that you are
connected to the cor-
rect base
- Switch it on
- Check base is
plugged into the
phone socket
- Try to move it away
* .
Page 55