Commissioning; Boiling Water; Cleaning And Care - Bifinett KH 1025 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Commissioning

• Before taking the appliance into use, ensure that ...
-
the appliance, plug and power cable are in
good working order and...
– all packaging materials have been removed
from the appliance.
• Fill the appliance up to the MAX marking on
e
the scale
with a water and vinegar mixture
having a mix-ratio of 6:1 and then bring it to
be boil – as described in the next section.
Warning
Do not inhale the vapours escaping during the boiling
process! This could lead to irritation of the mucous
membranes and an indisposition.
• When the process is finished, pour the water-
vinegar mixture away.
• Rinse the kettle out with clear water.
• Fill the appliance with water up to the MAX
marking on the scale
boil. When done, pour it away also.

Boiling water

Danger
Never place the electrical base
life-threatening danger!
• Lift the kettle off of the base when filling it!
• Remove the lid
w
in that you pull it upwards.
• Hold the kettle upright while filling it. Only in this
way can you correctly read the markings on the
e
scale
.
Fill the kettle ...
e
and then bring it to be
t
near water –
– at least to the MIN mark, so that the appliance
does not overheat,
– no higher than the MAX mark, so that no boiling
water spills out.
• First close the lid
• and then place the kettle on the base
that it is standing absolutely upright on the base
• Now insert the power plug into the power socket ...
• and press the ON/OFF switch
it engages.
• The control lamps integrated into the ON/OFF
r
switch
indicate that the appliance is now
heating the water up.
• The appliance switches itself off and the control
lamps go out as soon as the water is on the boil.
The ON/OFF switch
Warning
Remove the plug from the wall socket before you lift
the kettle from its base
potential short circuit by water possibly spilling out
of the carafe and falling onto live electrical connec-
t
tions in the base
Injury hazard
For safety reasons, the lid
while the water is boiling or is very hot. There is a
risk of receiving severe scalds.

Cleaning and Care

Danger
Do not open any part of the housing. There are no
user-servicable elements inside. An open housing
can create the risk of a lethal electrical shock.
- 15 -
w
...
t
r
upwards until
r
springs down.
t
. This prevents causing a
.
w
should not be opened
such
t
.

Publicidad

Tabla de contenido
loading

Tabla de contenido