Publicidad
Idiomas disponibles
Idiomas disponibles
6.
DIP switch settings
• The controller can work in 2 modes:
o DMX mode
o internal program mode
DMX mode
• To enable DMX mode, switch 10 must be set in the OFF position.
• Switches 1 ~ 9 determine the DMX starting address. The address is
determined by the switches in the ON-position. E.g.:
Switches 1, 3 and 6 are ON. The address becomes:
The DMX address for this example is 037.
Built-in programs
• To enable the internal program mode, switch 10 must be set in the
ON position.
• The other switches determine the current program.
switch
position
1
ON
2
ON
3
ON
4
ON
5
ON
6
ON
7
ON
8
ON
9
ON
• When in changing or fading colours mode, the changing or fading
speed is determined by switch 1~7.
o switch 1 ON: slowest speed
o switch 7 ON: fastest speed.
Note: When multiple speed switches are set, the highest setting will
be used.
10.01.2011
VDPCRGB3
red
green
blue
yellow
purple
cyan
white
changing colours (adjustable speed)
fading colours (adjustable speed)
5
switch
value
1
001
3
004
6
032
total:
037
program
©2009 Velleman nv
Publicidad
