Duraflame DFS-500-0 Manual De Instrucciones página 6

OPERATING INSTRUCTIONS
TO ACCESS CONTROL PANEL - Open the door to access the control panel.
- POWER
The Power switch supplies power to all of the functions of the fireplace and will illuminate the flame ef-
fect. This switch must be lit for any of the functions to work.
- HEAT
Your fireplace consists of a fan-forced wire element type heater. The HEATER switch turns the heater
ON and OFF. This switch must be lit for the heater function to work.
- TEMPERATURE
The Temperature control knob helps regulate the ambient temperature level. The further the knob is
rotated clockwise, the higher the set point temperature. Turning the knob counter-clockwise will lower
the set point temperature.
- BRIGHTNESS
The Flame Brightness control knob adjusts the flame brightness. Turning the knob to the left
(counter-clockwise ) dims the flame effect. Turning the knob to the right brightens the flame effect.
WARNING: Turn the power off when servicing this appliance. First turn the main power switch
to the "OFF" position. Then remove the electrical plug from the wall outlet.
Fig. 4
E-5