na VOLAr dryer
J
J
10oRemove the holder-glass.
11oExchange the positions of:
: The cover-hinge and handle door
:The holder-hinge and guider-
holder glass
12oRemove the Lever-Door, Cover-
Lever (DV45H7000E(G)* Only) and
then install it on the opposite side.
: DV48(5)H7400E(G)*/
DV45H7200E(G)* Refer Figure. 1
: DV45H7000E(G)* Refer Figure. 2
_
efer to the illustrations on the
right to aid you in the assembly
process.
Fig 2
Fig 1
13. Remove the cover-hole (P).
14. Assemble the holder glass and then fasten the 14 screws
that you removed in step 9.
15. Attach the cover-hole.
_A
cover hole is in the
manual.
spare
assy
16. Install the door on the frame-front and then fasten the
4 screws that you removed in step 2.
_
heck the positions of the screws you installed in the hinge
door.
Engl sh - 20