Intended Use; Product Description; Installation And Maintenance - Quick QCC PLT 300 Manual De Uso Y Mantenimiento

Dispositivo de control del sistema rgbw quick

Idiomas disponibles

CHARACTERISTICS / INSTALLATION

INTENDED USE

• The QCC-PLT 300 is intended to be used in nautical applications to control and adjust the brightness of LED RGBW light

sources.

• For fire-prevention reasons, install the QCC-PLT 300 in a ventilated, controlled-temperature environment, protected from

dust and humidity. Do not expose the dimmer pack to rain or humidity.

• Any other use should be considered improper and unpredictable.

READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THE PRODUCT. IN CASE OF

DOUBT, CONTACT YOUR DEALER OR QUICK

THE PACKAGE CONAINS: Quick

installation and use.

TECHNICAL ELEMENTS AND DEFINITIONS

• Control device: in this specific manual, this is a user interface that generates the command signal (indicated in the

connection diagram with DMX 512 device).

• RGBW LED light sources: in this specific manual, these are lighting devices inside which there is a RGBW LED. Each of

the four channels is to be driven in constant current.

• Command signal: in this specific manual, this is the electrical signal generated by a control device and which contains

the necessary information for the QCC-PLT 300.

• Control signal: in this specific manual, it is the electrical signal generated by the QCC-PLT 300 and which contains the

necessary information for the management of the RGBW system

The QCC-PLT 300 is an electronic device that is used to manage

up to 32 QCC-DRV CH4 by using just two wires for supplying

power and the control signal.

• The QCC-PLT 300 can be easily mounted on a omega rail. Install the device on a vertical surface for better ventilation.

• The device must be placed in a suitably protected distribution board so that it can operate under the environmental

conditions indicated in the general specifications for use, and is not within reach of personnel who are not qualified.

• Always disconnect the supply voltage during installation and maintenance operations.

• Make the connections following the best practices, using cable of adequate type and size that are appropriate for the

environment conditions.

• Critically inspect your work immediately after installing or servicing the product.

• Turn on the power, MAKE SURE THE POLARITY IS RIGHT.

RGBW system management device - conditions of warranty - the manual of

CUSTOMER SERVICE.

QCC-PLT 300 - REV001A

QUICK SPA

Tabla de Contenido