Items Supplied; Technical Data - Robust RB-SD 3,6 Li Manual De Instrucciones Original

Anleitung_RB_SD_3_6_Li_SPK7__ 16.07.12 11:28 Seite 16
GB
of 10-20°C. Protect them from humidity and direct
sunlight. Only place fully charged batteries in
storage (charged at least 40%).
8. Prevent the lithium-ion battery pack from freezing.
Battery packs which were stored below 0°C for
more than 60 minutes must be disposed of.
9. When handling batteries beware of electrostatic
charge: Electrostatic discharges cause damage
of the electronic protection system and the
battery cells. Avoid electrostatic charging and
never touch the battery poles.
When shipping or disposing of batteries and
cordless tools, always ensure that they are
packed individually in plastic bags to prevent
short circuits and fires.
Do not lose this safety information.
2. Layout and items supplied
(Fig. 1/4)
2.1 Layout
1. Bit chuck
2. Lamp
3. Locking button
4. ON/OFF switch for lamp
5. Battery capacity indicator
6. Switch for battery capacity indicator
7. Charging control lamp
8. Charging connection
9. On/Off switch
10. Clockwise/Counter-clockwise selector switch
11. Battery charger
12. Charging cable
13. Locking sleeve

2.2 Items supplied

Open the packaging and take out the equipment
n
with care.
Remove the packaging material and any
n
packaging and/or transportation braces (if
available).
Check to see if all items are supplied.
n
Inspect the equipment and accessories for
n
transport damage.
If possible, please keep the packaging until the
n
end of the guarantee period.
IMPORTANT
The equipment and packaging material are not
toys. Do not let children play with plastic bags,
foils or small parts. There is a danger of
swallowing or suffocating!
16
Cordless screwdriver
n
Battery charger
n
4x bits
n
Holster bag
n
Original operating instructions
n
3. Proper use
The cordless screwdriver is designed for tightening
and undoing screws.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Motor power supply: 3.6 V DC
Idling speed: 200 min
Clockwise/Counter-clockwise:
Charge voltage for rechargeable battery:
Charge current for rechargeable battery: 300 mA
Battery charger supply voltage: 230 V ~ 50 Hz
Charging time: max. 3-5 hours
Battery type:
Weight:
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L sound pressure level 62 dB(A)
pA
K uncertainty
pA
L sound power level 73 dB(A)
WA
K uncertainty
WA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
-1
Yes
6 V DC
Li-Ion
0.4 kg
3 dB
3 dB