Publicidad
Idiomas disponibles
Idiomas disponibles
Pulizia generale
Il saldatore può essere pulito con un panno umido e poco detergente liquido.
Non immergere mai il saldatore in acqua o far penetrare liquidi all'interno.
User Manual - MKC 70DA SOLDERING IRON
Applications
20W, 30W and 40W models: Radio controls, hobbies and crafts, small electrical parts.
60W model: Household electrical appliances, capacitors, etc
How to solder
1. File off any dirt, rust or paint on the part you wish to solder.
2. Heat the part with the soldering iron.
3. Apply rosin-based solder to the part and melt it with the soldering iron.
Note: when using non-rosin-based solder, be sure to apply a soldering paste
to the part before applying the solder.
4. Wait for the solder to cool and harden before moving the soldered part.
Caution
1. Handle the heated soldering iron with extreme care, as the high temperature of the iron can cause fires or
painful burns.
2. The first time you use the soldering iron, It man smoke slightly as the heating
element dries out. This is normal and should only last for approx. 10 minutes.
3. Never file the specially-plated tip.
Warning instructions
1. The appliance is not a toy, and must be kept out of children's hands.
2. Before cleaning the appliance or changing the filter, always remove the power lead plug from the socket.
Unscrewing the housing is not permitted.
3. This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
4. Children should be supervised to ensure that they do not play with the appliance.
5. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Publicidad
