User Manual - IBCONNECT DUPLO MINICOLUMNA Manual De Usuario

User Manual

01
02
03
04
VOICE AND DATA CABLE
A
ELECTRICAL COMPONENTS CABLE
B
Rawlplugs and screws
Strip the cables
B
FIXING TO THE FLOOR
Remove the front cover by placing a flathead
screwdriver between the joints of the cover and
using it as a lever, as shown in the image.
FIXING TO THE FLOOR
Once you have removed the cover, you
can access the anchoring system.
You will see the base where you are going to
place it. Mark and use a drill to make the
necessary holes. Then, insert the rawlplugs and
screw the base to the floor, as shown in diagram
2.
REMOVING THE VOICE AND DATA COVER
Use a flathead screwdriveras a lever by placing
it between the voice and data cover and the
profile joint, as shown in diagram 03.
Thread the V/D cables through the bottom part.
Place the RJ45 connectors in the cover and
connect them as shown
Place the cover on the rail with the connectors
and collect any excess cable.
For the electric connection, thread the cables
through the bottom and connect to the terminal
A
on the base, detail B.
ES EN
in det ail A.