GreenWorks Pro GPW2200-1 Manual Del Operador página 9

EN
3.1.7 INSTALL THE WHEELS
1. Put an axle (24) through the wheel and handle frame.
2. Attach a washer (23) to the axle (24).
3. Put a cotter pin (22) through the hole of the axle (24).
3.1.8 INSTALL THE SPRAY WAND
1
1. Push the end of the spray wand (5) into the gun handle
(1).
2. Turn the spray wand (5) clockwise until the tabs lock into
position.
Make sure that the connection has no leakage.
3.1.9 INSTALL THE HIGH PRESSURE HOSE
8
1. Push and turn clockwise one end of the high pressure
hose (4) into the inlet coupler (9).
2. Install and tighten the other end of the high pressure hose
onto the water outlet (8) coupler.
23 24
22
5
WARNING
9
4
English
4 OPERATION
Make sure that all the connections are tight and have no
leakage before operation.
4.1 CONNECT THE WATER SUPPLY
TO THE MACHINE
For easy operation, please use a self-coiling garden hose (not
provided).
When you operate the self-coiling hose, make sure that the
hose has no blockage.
• The water supply must come from the water main
• Do not use hot water
• Do not use water from ponds or lakes
Do the local regulations when you connect the garden hose
to the water supply. Direct connection through a receiver
tank or backflow preventer is usually permitted.
Inspect the filter in the water inlet connector before you
connect the garden hose
• If the filter is damaged, do not use the machine until the
filter is replaced.
• If the filter is dirty, clean the filter.
1. Uncoil the garden hose (25).
2. Let the water flow through the garden hose (25) for 30
seconds.
3. Turn the water supply off.
4. Install and tighten the end of the garden hose (25) to the
water inlet (9) connector.
8
WARNING
WARNING
WARNING
WARNING
CAUTION
25 9