memorex iWakeUp Mi4014 Guía Del Usario página 18

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TO SHUT THE ALARM OFF
1
Press the ALARM 1 1 or ALARM 2 2 button (which corresponds to the alarm that
was set) and the alarm will turn off and NOT be set for the next day. To set the
alarm for the next day, press any other buttons (except ALARM 1, ALARM 2 or
SNOOZE button).
NOTE: If set to iPod or Radio, while the alarm is on, if you press any button on the
unit (except the SNOOZE/SLEEP button or the Power button), the unit will change
from Alarm mode to normal Power On mode, so you can adjust any setting (i.e.,
volume level, radio frequency, etc.) as desired. Press the Power button to turn off
the unit if necessary. If set to Buzzer, while the alarm is on, if you press any button
on the unit, the unit will turn off.
SNOOZE
1
While the alarm is sounding, press the
SNOOZE/SLEEP button; the SNOOZE
indicator will appear in the display. Also,
"10" will appear in the display for five
seconds and then revert back to the
actual time. The alarm will turn back on
automatically ten minutes later.
NOTE:
To cancel the SNOOZE function (the alarm will not turn back on), press the
ALARM 1 or ALARM 2 button (which corresponds to the alarm that was set);
the SNOOZE indicator will disappear from the display and the alarm will NOT
be set for the next day. To set the alarm for the next day, press any other
buttons (except ALARM 1, ALARM 2 or SNOOZE button).
OPERATION (CONTINUED)
SNOOZE
SNOOZE
1
2
To set the SNOOZE time to a time other
than 10 minutes, when "10" appears in the
display, press the SNOOZE/SLEEP button
again. Each press of the SNOOZE/SLEEP
button will increase the SNOOZE time by
five minutes (up to "60" for 60 minutes).
Once you stop pressing the button, the
display will show the SNOOZE time for five
seconds and then revert back to the actual
time. The alarm will turn back on according
to the SNOOZE time set.
17
2
SNOOZE

Publicidad

Tabla de contenido
loading

Tabla de contenido