Tornado EB 30/1 Manual Del Usuario página 5

Symbols on the machine
– Protect the charger against moisture;
store it dry. The appliance is suitable for
use only in rooms; do not expose the
appliance to rain.
Start up
Description of the Appliance
When unpacking the product, make sure
that no accessories are missing and that
none of the package contents have been
damaged. If you detect any transport dam-
ages please contact your dealer.
Note:
Please refer to page 2 for figures of the ap-
pliance and the operation.
1 Universal joint
2 ON/OFF foot switch
3 Rechargeable battery, detachable
4 Unlocking button, battery
5 Dirt container, detachable
6 Unlocking mechanism for dirt container
7 Casing
8 Brush roller, changeable
9 Unlocking button for brush roller
10 Telescopic strut, adjustable height
11 Turning handle for height adjustment
12 Handle
13 Charger with charging status display
and charging cable
Installing the telescopic handle and
the handle and adjusting the height
see Figure 2
The telescopic strut consists of 3 parts.
While assembling it, make sure that the
parts lock into each other.
 Insert the handle on the longer strut
with turning handle.
 Insert together the longer and shorter
struts; while assembling it, press the
locking button.
 Insert the entire strut with the locking
button into the joint on the appliance.
 Loosen the handle and pull out the strut
to the desired working height; turn the
handle to the correct position and tight-
en using the turning handle.
Charge the battery
see Figure 3
The battery is not charged at the time of de-
livery. Charge it before commissioning the
appliance and then as and when required.
Note: The battery can be charged only
when it is removed out of the appliance.
 Connect the battery to the charger us-
ing the charging cable or rather insert
the battery in the charger.
 Insert the charger delivered with the ap-
pliance into a proper socket.
The charger display blinks green. The bat-
tery is being charged.
Charging time for empty battery
Charger
Standard
Quick
Note
If the charging time is exceeded, the charg-
er shifts to retention charging. The charger
display blinks green.
Error display
In case of doubt, contact the authorised
customer service.
Insert the battery
see Figure 4
 Insert the battery into the intake and
lock it.
Starting the work
see Figure 5
 Switch on the appliance; press the on/
off foot switch to do so.
 Move the appliance forward and back-
ward to clean it.
 Use the right side (battery side) to clean
the appliance close to the edges.
– 2
EN
Li-Ion
6.654-349.0
3 h
90 min
: blinks red
Operation
5