Descargar Imprimir esta página

miniland baby 89058 Manual Del Usuario página 10

Ocultar thumbs Ver también para 89058:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
ENGLISH
8. Repeat the operation for the other nostril if necessary.
N.B: In the event the accumulated amount of mucus is close to the maximum
capacity (around 4 ml), follow the steps provided in section 6 – CLEANING
INSTRUCTIONS to clean the device before using it again. Do not continue to
use the device until it has been cleaned if the mucus is close to the level of the
opening in the canal (illustrated in Figure 3).
6. CLEAN INSTRUCTIONS (Figure 4)
1. Ensure the battery compartment (8) is correctly closed.
2. Remove the silicone tip (1, 2).
3. Remove the mucus container (3) using the thumb and forefinger, as
illustrated in the image.
4. Remove the silicone rings (4) from the nasal aspirator.
5. Wash all the parts with warm water and soap. You may place the base of
the nasal aspirator 5) directly under the tap in order to wash it.
6. Reassemble all the parts as illustrated in the image.
7. Check all the parts are correctly in place and align the indicated marks.
If the amount of accumulated mucus has passed the maximum level of
the mucus container (the level of the canal opening) while using the nasal
aspirator, or if you notice the mucus has flowed into the area of the air outlet
in the base (Figure 5):
1. Ensure the battery compartment (8) is correctly closed.
2. Remove the silicone tip (1, 2) and the mucus container (3).
3. Place the base of the nasal aspirator in clean water as illustrated in the
image. Press the button (7) for 15 seconds to clean the internal air pump. The
water will flow in the direction indicated in the image.
4. Change the water and repeat step 3 several times if necessary.
5. Remove the nasal aspirator from the water once you have concluded the
cleaning process. Press the button (7) for around 30 seconds until the internal
air pump is dry.
6. Dry the exterior of the nasal aspirator and reassemble all the parts.
7. TECHNICAL SPECIFICATION
· Operation environment:
· Temperature: 5°C~40°C
· Humidity: 15%~93%
· Storage & Transportation environment
· Temperature: -10°C~50°C
· Humidity:≦93%
· Power: 2 x 1.5V AA alkaline batteries
· Shelf life: 5 years
10

Publicidad

loading