Taurus ALPATEC PONENT 16 Manual De Instrucciones página 9

- Screw the nut that fixes the grill in place (D), making sure it fits together
correctly.
- Position the fan propeller (E) on the motor shaft (F).
- Screw down the screw that holds the propeller in place (B), making sure it is
held in position correctly.
- Position the front grill (A) against the back grill (E), making sure the safety
screw fits together. Fix the grill with the hooks and screw the safety screw (K)
by using a screwdriver.
- Check that the propeller turns correctly.
Instructions for use
Before use:
- Remove the appliance's protective film.
- Make sure that all the product's packaging has been removed.
Use:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Guide the diffuser of the appliance to direct the flow of air in the desired
direction.
Fan Fuction:
- Turn the appliance on, by using the speed selection buttons.
Oscillation function:
- The oscillation function makes it possible to direct the flow from the apparatus
so that it automatically alternates over a range of 75º.
- To activate this function, press the (H) button.
- To deactivate this function, follow the procedure for switching it on in reverse.
Height adjuster: (Only for standing pole models)
- The height of the appliance is adjustable. Untighten the knob (M), position the
appliance at the desired height and press the knob again (M).
Once you have finished using the appliance:
Turn off the appliance by selecting 0 on the speed regulator.
- Unplug the appliance to the mains.
Carry handle/s:
- The device has a handle on the upper part so it can be transported easily and
comfortably (Fig. 2).
Cleaning
- Disconnect the appliance from the mains and let it cool before undertaking
any cleaning task.
- Clean the equipment with a damp cloth with a few drops of washing-up liquid
and then dry.
- Do not use solvents, or products with an acid or base pH such as bleach, or
abrasive products, for cleaning the appliance.
- Do not let water or any other liquid get into the air vents to avoid damage to
the inner parts of the appliance.
- Do not submerge the appliance in water or any other liquid, or place it under
a running tap.
Anomalies and repair
- Take the appliance to an authorised technical support service if problems
arise. Do not try to dismantle or repair without assistance, as this may be
dangerous.
For EU product versions and/or in the case that it is requested in your country:
Ecology and recyclability of the product
- The materials of which the packaging of this appliance consists are included in
a collection, classification and recycling system. Should you wish to dispose of
them, use the appropriate public recycling bins for each type of material.
The product does not contain concentrations of substances that could be
considered harmful to the environment
This symbol means that in case you wish to dispose of the product
once its working life has ended, take it to an authorised waste
agent for the selective collection of waste electrical and electronic
equipment (WEEE)
-The following information lists the ecological features that apply to this
appliance:
Manual Ponents 16 Alpatec.indb 9
PONENT 16 (VER VII)
Maximum fan flow (F)
Power used for fan (P)
Service value (SV) (in compliance with IEC 60879)
Energy consumption in standby mode (PSB)
Acoustic power level of fan (LWA)
Maximum air speed ( c )
PONENT 16C (VER VII)
Maximum fan flow (F)
Power used for fan (P)
Service value (SV) (in compliance with IEC 60879)
Energy consumption in standby mode (PSB)
Acoustic power level of fan (LWA)
Maximum air speed ( c )
This appliance complies with Directive 2006/95/EC on Low Voltage, Directive
2004/108/EC on Electromagnetic Compatibility, Directive 2011/65/EC on the
restrictions of the use of certain hazardous substances in electrical and electro-
nic equipment and Directive 2009/125/EC on the ecodesign requirements for
energy-related products.
50,3 m³ /min
34,5 W
1,5 (m³/min)/W
N/A W
53 dB(A)
2,6 m/seg
43,7 m³ /min
34,3 W
1,3 (m³/min)/W
N/A W
53 dB(A)
2,9 m/seg
5/11/15 9:07