Charge The Battery; Turn Phone On & Off; Make A Call - Motorola RAZR2 V8 Guía Del Usario

charge the battery

New batteries are not
fully charged. Open
the protective cover
on your phone's
micro-USB port, and
plug the battery
charger into your phone and an electrical outlet. The
battery charge indicator light on your phone shows
when the battery is charging. The display shows
Charge Complete when finished.
Tip: Motorola batteries have circuitry that protects the
battery from damage from overcharging.
Note: You can charge your battery by
connecting a cable from your phone's
micro-USB port to a USB port on a
computer. Both your phone and the
computer must be turned on, and your computer must
have the correct software drivers installed. A
16 essentials
Motorola Original USB cable and supporting software
may be included with your phone. These tools are also
sold separately.
turn phone on & off
Press and hold the
O
power/end key for a few
seconds, or until the display
turns on or off.

make a call

Open the flip, then enter a phone number and press
N
the send key .
Tip: To voice dial a call, see page 25.