Error Codes - Honeywell EConnect TL9160AR Guía De Instalación Del Sistema

Mounting the outdoor sensor (optional)
Mount the sensor vertically on an
exterior wall, at least 6 inches below
any overhang. Choose a location
protected from direct sunlight.

Error codes

Display Description
LO The indoor temperature is below 32°F (0°C).
HI
The indoor temperature is above 140°F (60°C).
- - The temperature reading is currently unavailable or the sensor is defective.
E128
The wireless network setup must be redone.
E129 Attempting to connect incompatible wireless devices.
E130
Invalid address. Call customer assistance.
E134 Low signal strength. Move wireless device to a different location and try again.
E137
Maximum number of devices is exceeded.
E138 Make sure Connected light on EIM is flashing and you are 2+ feet away from EIM.
E152
Incorrect order. Make sure to link EIM to proper thermostat.
EConnect™ Wireless Thermostat Kit TL9160AR
Place sensor securely in bracket,
facing away from wall.
21 69-2474EFS—01