ENGLISH
Note: Insert the paper filter bag only into a dry
container.
• Place the motor housing onto the dirt contai-
ner and close the container.
6.2 Flat folding filter
How to clean the flat folded filter:
Switch off the vacuum and shake the filter by
pulling the filter shaker repeatedly.
How replace the flat folded filter.
• Open the cover lock and hinge up the cover.
• Remove the flat folding filter and tap it to
remove dirt.
• Clean the filter under running water if the dirt
does not come free. (Next, allow the filter to
dry).
• Only change the filter if the dirt is extremely
stubborn and cannot be washed out.
en - 6
• It is essential to use a new filter if the filter is
damaged.
• Replace the filter.
• Close and lock the cover.
6.3 Level electrodes
Your suction unit is protected from overfilling in
the case of wet suction by two electrodes.
• The level electrodes must be cleaned if they
are heavily contaminated.
6.4 Dirt container
Open the container lock, remove the motor
housing, empty the dirt container and wash it out
if necessary.
6.5 Accessories
The suction hose can be rinsed out with water.