Product Features; Technical Data; Starting Operation - Bosch AL 1115 CV Manual Original

OBJ_BUCH-1256-005.book Page 9 Friday, October 7, 2016 4:07 PM
The severed plug must be disposed of to avoid a possible shock hazard and should never be
inserted into a mains socket elsewhere.

Product Features

The numbering of the product features refers to the illustration of the battery charger on the
graphics page.
1 Battery pack*
2 Green battery charge indicator
3 Charging compartment
*Accessories shown or described are not part of the standard delivery scope of the product. A com-
plete overview of accessories can be found in our accessories program.

Technical Data

Battery Charger
Article number
Output voltage (automatic voltage detection)
Charging current
Allowable charging temperature range
Charging time for battery capacity, approx.
– 1,3–1,5 Ah
– 2,0 Ah
Number of battery cells
Weight according to EPTA-Procedure 01:2014
Protection class
Please observe the article number on the type plate of your battery charger. The trade names of individual
battery chargers may vary.
Operation

Starting Operation

 Observe the mains voltage! The voltage of the power supply must correspond with the
data given on the nameplate of the battery charger. Battery chargers marked with 230 V
can also be operated with 220 V.
Charging Procedure
The charging procedure starts as soon as the mains plug of the battery charger is plugged in-
to the socket outlet and the battery 1 is inserted into the charging compartment 3.
Due to the intelligent charging method, the charging condition of the battery is automatically
detected and the battery is charged with the optimum charging current, depending on bat-
tery temperature and voltage.
This gives longer life to the battery and always leaves it fully charged when kept in the charger
for storage.
Note: The charging procedure is only possible when the battery temperature is within the al-
lowable charging temperature range, see Section "Technical Data".
Bosch Power Tools
English | 9
AL 1115 CV
2 607 225 5..
V 3.6 – 10.8
mA 1500
°C 0 – 45
(80%) 100%
min (50) 65
min (65) 80
1 – 3
kg 0.30
/ II
1 609 92A 39Y | (7.10.16)