CAMPING LIGHT
Introduction
To get the most out of your new camping
light, please read through these instructions
before use. Please also save the instructions
in case you need to refer to them at a later
date.
Technical data
Power supply:
Dimensions:
Functions:
Can stand or hang
For indoor use only
Class III product: Designed to be
III
supplied from a separated extra low
voltage supply (SELV). The voltage
from a SELV supply is low enough
that a person can normally come into
contact with it without the risk of
electric shock.
Can be used in a tent or caravan but must
not be exposed to water.
10
3×1.5 V AA batteries
(not included)
12.5×8.5×8.5 cm
Warm white light or
artifi cial fl ame
Use
Unscrew the bottom of the light and insert 3
x 1.5 V AA batteries. Check that the batteries
are correctly aligned, as indicated in the
battery compartment. Screw the bottom of
the light back on.
Hold the bottom and pull the top of the light
up to switch the light on.
Hold the bottom and push the top of the
light down to switch the light off .
Switch between warm white light or artifi cial
fl ame by switching the light on and off .
on
off