Operating Modes - Gabarron TBB-8K Instrucciones De Instalacion Y Uso

EN
Indicator of active
heating element
Comfort / Eco bar
(Chrono mode)
Operating
mode icons
Open Window Detection
Note 1: When the symbol
Nota 2: This icon
POWER ON / STAND-BY
Press the [On/Stand-by] key to turn on the device or to enter the "Stand-by" mode.
When activated, the bottom part of the display shows the current time, while the configured operative mode and
the temperature are shown in the upper part, when in "Stand-by" mode current time, day of the week and the
message " Stb" are displayed.
Note: When the device goes into "Stand-by" mode it beeps twice for 0.5s. When the device is activated it beeps
once for 1s.
COMFORT & ECO TEMPERATURES
Two different levels of temperature can be set:
- Comfort: Temperature level used for Chrono, Pilot Wire and Comfort modes. It is recommended for the
periods of time when the user is at home and the maximum comfort is required.
- Eco: Temperature level used for Chrono and Eco modes. It is recommended for nights and small away
periods of time.
Set the mode of the temperature level to modify (Comfort or Eco) using the button [Prog] and modify its value for
each level. The desired temperature can be set pressing the [+] and [-] buttons. (From 7ºC to 32ºC).
Note: The temperature of "Eco" mode must be below to the "Comfort" mode temperature. For this reason, the
"Eco" mode temperature can be set to a value between 7°C and the configured "Comfort" mode temperature and
the "Comfort" mode temperature can be set to a value between the configured "Eco" mode temperature and 32ºC.

OPERATING MODES

Press the [Prog] button to select the desired operative mode. An icon on the display indicates the selected
operating mode, according to the following table:
Pilot Wire
Day of the week
is on, the heating element is active.
indicates that is being received signal from remote control. (optional).
Comfort
Key-lock icon
Eco Frost Prot. Timer-2h
9
Configured temperature
24h indicator
IR receiver indicator
Clock
Chrono